If you’re looking for the ultimate powerhouse in a sleek form factor, you should check out the ETaker M2000 Power Station, which is making headlines for bringing the latest GaN technology to power plants. It is small, lightweight, has a large battery capacity and delivers high voltage for a wide range of needs. Whether for home backup, camping or emergency use, the ETaker M2000 is an all-in-one power station that can meet all your needs.
Built on the latest GaN technology
What sets the ETaker M2000 apart from other power plants is that it is the first power plant to use third-generation GaN (Gallium Nitride) technology. If you’re wondering what exactly is GaN?Well, it’s a new kind of semiconductor material that emits less heatis energy efficient and much smaller in size.
Compared to traditional battery technology, GaN can handle high power and high voltage with 50% less heat dissipation. Moreover, the power plant can convert DC to AC with an efficiency of 96%.
In case you don’t know yet: many power banks and charging adapters already use GaN technology and it is finally coming to power stations thanks to ETaker. Thanks to the GaN technology in the ETaker M2000 central, the total volume is the same reduced by 30% despite packing a large battery capacity of 2008Wh.
As you know, power plants need to be highly portable for mobility, and the smaller footprint makes the ETaker M2000 a preferred choice for users.
High density semi-solid Li-ion battery
Traditional power plants and solar generators use LiFePO4 batteries, but the ETaker M2000 is equipped with an advanced semi-solid Li-ion battery. Also known as lithium-ion flow batteries, it offers significant advantages over LiFePO4 batteries, including higher energy densityfast charging/discharging, long lifespan, thermal stability and more.
As a result, the 2,008 Wh battery pack in the ETaker M2000 has a 30% to 50% higher energy density. It can store more long-lasting energy in the same volume or weight.
For example, competitors such as Jackery and EcoFlow with similar battery packs weigh approximately 19.5 kg and 21.77 kg. But even with a larger battery pack of 2008 Wh, the ETaker M2000 weighs only 17 kg with a size of 25.8 x 21.6 x 35.5 cm.
Apart from that, the unique thing about ETaker is that you can connect two power plants to expand the battery capacity, while other competitors promote you to buy standalone battery packs to expand the capacity, which cannot be used separately.
Finally, semi-solid Li-ion batteries continue strict safety tests to ensure they can operate smoothly even in harsh environments.
Multi-connectivity and high output power
The ETaker M2000 power station not only expands the battery capacity, but also increases the AC power up to 20 kWh. You can connect up to 10 devices at the same time for simultaneous charging and increase the AC power up to 16 kW. For broader compatibility with a wide range of appliances and equipment in the US, 240V/120V requirements are basically met with the ETaker M2000 power station.
So whether it is for home energy storage, emergency response or outdoor activities like camping or RV travel, the simultaneous use feature makes it completely convenient for people. In addition, the ETaker M2000 power station supports a wide range of charging methods, including AC charging, solar charging, wind charging, car chargingand even EV charging.
Overall, there is simply no compromise on performance with the ETaker M2000 powerplant.
Portable and lightweight
Thanks to GaN technology and a semi-solid Li-ion battery, the footprint of the ETaker M2000 is significantly reduced. A single ETaker M2000 weighs just 17 kg and is 60% smaller than other competing power generators. And best of all: it is 30% lighter which is icing on the cake. It makes the power station highly portable and lightweight and can be easily transported for outdoor activities to even remote locations.
Combined with advanced technologies such as GaN, a high-density semi-solid Li-ion battery, powerful performance and a lightweight profile, the ETaker M2000 is also noise-free. It generates absolutely no noise (0 dB) when operating below 1,000 W. Even at full capacity, the power plant produces 60% less noise than competing products. That’s quite an achievement, isn’t it?
All this is possible thanks to active and passive heat dissipation implemented on the ETaker M2000. It comes with a fan and aluminum housing cooling, so the power station remains absolutely noise-free. And because it contains GaN material to conduct electricity, the heat dissipation is already quite low, making maintaining a noise-free environment easier for the power plant.
Strongly built; Adaptable to all environments
The ETaker M2000 is well built and quite durable. His body is made of six series alloy material which can withstand even hard drops, collisions and impacts. No plastic shell is used to ensure the overall structural rigidity of the power plant. Even on beaches or deserts with dust and moisture, nothing can affect its inner workings.
Moreover, the semi-solid battery pack comes with 90% liquid electrolytes that can also tolerate punctures and compression. Moreover, ETaker M2000 is designed in a way that can handle extremely harsh conditions. Are IP63 certified for water and dust protection and can withstand extremely cold conditions.
Even if you encounter stormy snow or abnormally low temperatures, the power station can function properly under normal charging and discharging. To give you a figure, it can operate in temperatures as low as -30°C (-22°F).
Why the ETaker M2000 is suitable for use even in extreme conditions is that it features battery preheating technology that preheats the internal circuits to reach a normal temperature for better operation. In addition, the aluminum-based heating element is activated when the power plant detects a temperature below 5℃ Preheat the battery. The integrated Battery Management System (BMS) continues to heat the battery cells until it exceeds 8℃.
All in all, the ETaker M2000 provides all necessary guarantees for the normal operation of the power station in all environments.
Your best friend in need
During emergencies or power outages, the ETaker M2000 can be a great help. It has many connectivity options and you can use it to power a CPAP machine for medical emergencies or charge your camera or smartphone. It has a number of USB and DC ports and supports fast charging protocols such as QC and PD charging standards.
The switchover time of the exchange is low and can deliver uninterruptedly power supply within 20 ms, which is great. Moreover, it can start cars on gas, charge electric vehicles and also provide emergency lighting.
In short, the ETaker M2000 is a suitable power station that can be used both at home and in emergency situations. It is small, lightweight, packed with features and has a huge battery capacity with great power.
Buy the ETaker M2000 (2,008 Wh) power station [Original Price: $2,199 | Final Price: $1,099]
